Warming tips for cozy home heating
Guide

How to tame the tilt: the ultimate guide to balancing your samsung top load washer

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er,...

What To Know

  • When your washer is unbalanced, the load shifts during the spin cycle, causing the washer to shake and vibrate excessively.
  • Yes, you can use a spirit level as long as it’s placed on a flat surface on top of the washer.
  • It’s not recommended to wash a single large item alone, as it can easily unbalance the load.

Balancing your Samsung top load washer is crucial for optimal performance and longevity. An unbalanced washer can cause excessive noise, vibration, and even damage to the machine. In this comprehensive guide, we’ll walk you through the simple steps on how to balance your Samsung top load washer effectively.

Understanding the Importance of Balancing

When your washer is unbalanced, the load shifts during the spin cycle, causing the washer to shake and vibrate excessively. This can not only be annoying but also put strain on the machine’s components, potentially leading to costly repairs. Balancing the load evenly distributes the weight, reducing vibration and ensuring smooth operation.

Tools and Materials

  • Level: To ensure your washer is level on the floor
  • Screwdriver: To adjust the leveling legs
  • Wrench: To tighten or loosen the bolts

Step-by-Step Instructions

1. Level the Washer:

  • Place the level on top of the washer.
  • Adjust the leveling legs at the bottom of the washer until the bubble is centered.

2. Check the Suspension Springs:

  • Open the lid and remove the agitator.
  • Check the suspension springs around the tub for any damage or wear.
  • If any springs are damaged, they should be replaced.

3. Inspect the Shock Absorbers:

  • Locate the shock absorbers at the back of the washer.
  • Check for any leaks or damage.
  • If the shock absorbers are faulty, they should be replaced.

4. Balance the Load:

  • Load the washer evenly around the center of the tub.
  • Avoid overloading or underloading the washer.
  • If the load is too small, add a few towels or blankets to balance it.

5. Adjust the Counterbalance Bolts:

  • Locate the counterbalance bolts on the back of the washer.
  • Use a wrench to tighten or loosen the bolts.
  • Tighten the bolts on the side where the washer is leaning.

6. Run a Test Cycle:

  • Close the lid and run the washer on a short spin cycle.
  • Observe the washer for any vibration or shaking.
  • If the washer is still unbalanced, repeat steps 4-6 until the load is balanced.

Tips for Maintaining Balance

  • Always sort laundry before washing to prevent uneven distribution.
  • Use a mesh laundry bag for small items that can get tangled.
  • Avoid washing large items alone, as they can easily unbalance the load.
  • Clean the lint filter regularly to prevent blockages and maintain proper drainage.

Troubleshooting Unbalanced Loads

1. Load Size Too Small:

  • Add a few towels or blankets to balance the load.

2. Load Distribution Uneven:

  • Redistribute the laundry evenly around the center of the tub.

3. Damaged Suspension Spring:

  • Replace the damaged spring as soon as possible.

4. Faulty Shock Absorber:

  • Contact a qualified appliance repair technician for replacement.

Recommendations: Ensuring a Smooth and Efficient Wash

By following these simple steps, you can effectively balance your Samsung top load washer, ensuring a smooth and efficient wash cycle. Regular maintenance and troubleshooting will help maintain the balance and extend the lifespan of your washer. Remember, a balanced washer is a happy washer!

Information You Need to Know

Q: How often should I balance my Samsung washer?

  • A: It’s recommended to balance your washer every few months or whenever you notice excessive vibration.

Q: Can I use a spirit level instead of a level?

  • A: Yes, you can use a spirit level as long as it’s placed on a flat surface on top of the washer.

Q: Is it okay to wash a single large item in my washer?

  • A: It’s not recommended to wash a single large item alone, as it can easily unbalance the load. Add a few smaller items to balance it out.

Q: What is the recommended load size for a Samsung top load washer?

  • A: The recommended load size varies depending on the model of your washer. Refer to your washer’s user manual for specific guidelines.

Q: Can I use a load balancer to balance my washer?

  • A: Yes, a load balancer can help distribute the load evenly and reduce vibration. However, it’s still important to follow the other balancing steps outlined in this guide.
Was this page helpful?

Rob Sanders

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er, Rob takes pride in testing out the latest tools and gadgets to see how they can make home projects easier. When it comes to heating systems, he's evaluated over 50 different furnace and boiler models over the years. Rob founded Nurturing Homeaid with his business partner Jim in 2020 to provide homeowners with genuine product recommendations they can trust. In his free time, Rob enjoys remodeling old homes with his family and traveling to visit architectural landmarks across the country. He holds a bachelor's degree in Journalism from Syracuse University.
Back to top button