Defective blue air purifier fan? follow these steps to get it humming again

If your Blue air purifier fan has stopped working, don’t worry – you’re not alone. This is a common problem that can be caused by a variety of factors. In this blog post, we’ll walk you through some of the most common causes of a Blue air purifier fan not working and provide step-by-step instructions on how to fix the problem.

Common Causes of a Blue Air Purifier Fan Not Working

There are several common causes of a Blue air purifier fan not working, including:

• Power issues: The most common cause of a Blue air purifier fan not working is a power issue. Make sure that the purifier is plugged into a working outlet and that the power switch is turned on.
• Filter issues: A dirty or clogged filter can restrict airflow and cause the fan to stop working. Replace the filter every 6-12 months, or more often if you live in a dusty environment.
• Motor issues: The motor that drives the fan can fail over time. If you hear a strange noise coming from the purifier, it may be a sign that the motor is failing.
• Control board issues: The control board is responsible for controlling the fan speed and other functions of the purifier. If the control board fails, the fan may stop working.

Troubleshooting a Blue Air Purifier Fan Not Working

If your Blue air purifier fan is not working, follow these troubleshooting steps:

1. Check the power: Make sure that the purifier is plugged into a working outlet and that the power switch is turned on.
2. Check the filter: Remove the filter and inspect it for dirt and debris. If the filter is dirty, replace it with a new one.
3. Listen for strange noises: If you hear a strange noise coming from the purifier, it may be a sign that the motor is failing. Contact Blue Air customer service for assistance.
4. Reset the purifier: Unplug the purifier from the outlet and wait 60 seconds. Plug the purifier back in and turn it on. This will reset the purifier and may fix the problem.
5. Contact Blue Air customer service: If you have tried all of the troubleshooting steps above and the fan is still not working, contact Blue Air customer service for assistance.

How to Replace the Motor in a Blue Air Purifier

If the motor in your Blue air purifier has failed, you can replace it yourself with a few simple tools. Here are the steps:

1. Unplug the purifier from the outlet.
2. Remove the back panel of the purifier.
3. Locate the motor. The motor is usually located in the center of the purifier.
4. Disconnect the wires from the motor.
5. Remove the motor from the purifier.
6. Install the new motor.
7. Connect the wires to the new motor.
8. Reinstall the back panel of the purifier.
9. Plug the purifier back into the outlet.

How to Replace the Control Board in a Blue Air Purifier

If the control board in your Blue air purifier has failed, you can replace it yourself with a few simple tools. Here are the steps:

1. Unplug the purifier from the outlet.
2. Remove the back panel of the purifier.
3. Locate the control board. The control board is usually located on the side of the purifier.
4. Disconnect the wires from the control board.
5. Remove the control board from the purifier.
6. Install the new control board.
7. Connect the wires to the new control board.
8. Reinstall the back panel of the purifier.
9. Plug the purifier back into the outlet.

Summary

If your Blue air purifier fan is not working, don’t worry – you can fix the problem yourself with a few simple tools. By following the troubleshooting steps in this blog post, you can quickly and easily get your purifier up and running again.

Top Questions Asked

Q: Why is my Blue air purifier fan not working?
A: There are several common causes of a Blue air purifier fan not working, including power issues, filter issues, motor issues, and control board issues.

Q: How do I troubleshoot a Blue air purifier fan not working?
A: To troubleshoot a Blue air purifier fan not working, follow these steps: check the power, check the filter, listen for strange noises, reset the purifier, and contact Blue Air customer service.

Q: How do I replace the motor in a Blue air purifier?
A: To replace the motor in a Blue air purifier, follow these steps: unplug the purifier, remove the back panel, locate the motor, disconnect the wires, remove the motor, install the new motor, connect the wires, reinstall the back panel, and plug the purifier back in.

Q: How do I replace the control board in a Blue air purifier?
A: To replace the control board in a Blue air purifier, follow these steps: unplug the purifier, remove the back panel, locate the control board, disconnect the wires, remove the control board, install the new control board, connect the wires, reinstall the back panel, and plug the purifier back in.